Apps

Configure Installed Apps of the Unit

Each installed app can be configured to a certain level via the web interface.

Info

The default login for the web interface is: Username: admin Password: nexgentec

Open a browser and enter the device’s network address in the address bar, then press Enter.

Picture Picture

Use the top menu bar to navigate to Apps and select the app to be configured.

Subsections of Apps

Amplifier

Using the top menu bar, navigate to Apps > Amplifier.

Files

Files > Log

Selecting “Files” will open the file browser where you can download and view the log files from the app.

Options

Options > General

logLevel

  • Select the log level for the app.

transport

  • Read-only: This field shows the internally used transport address.

Control

Control > Channels

Picture Picture

Status

  • These icons show the status of the amplifier channel. Also, the temperature is displayed.

Action

  • Use these buttons to turn the amplifier channel on and off. The amplifier channels can also be muted and unmuted. Be aware that due to a hardware limitation, channels 1 and 2 always follow the same power and mute settings, as do channels 3 and 4.

API

Using the top menu bar, navigate to Apps > API.

Files

Files > Log

Selecting “Files” will open the file browser where you can download and view the log files from the app.

Options

Options > General

logLevel

  • Select the log level for the app.

transport

  • Read-only: This field shows the internally used transport address.

api

  • Use the dropdown menus to select the Endpoint and the port to use for each protocol that the API can communicate with.

Broker

Using the top menu bar, navigate to Apps > Broker.

Files

Files > Log

Selecting “Files” will open the file browser where you can download and view the log files from the app.

Options

Options > General

logLevel

  • Select the log level for the app.

transport

  • Read-only: This field shows the internally used transport address.

Dante

Using the top menu bar, navigate to Apps > Broker.

Files

Files > Log

Selecting “Files” will open the file browser where you can download and view the log files from the app.

Options

Options > General

network

  • Select the interface to be used for Dante audio. This interface will be used for audio data transmission.

Display

Using the top menu bar, navigate to Apps > Display.

Files

Files > Log

Selecting “Files” will open the file browser where you can download and view the log files from the app.

Options

Options > General

logLevel

  • Select the log level for the app.

transport

  • Read-only: This field shows the internally used transport address.

time

  • Select the time format to be shown on the display, 24h or AM/PM.

temperature

  • Select the temperature format to be shown on the display in Celsius or Fahrenheit.

backlight

  • Select the brightness level. Possible values range from 0 to 255. At 0, the display on the front is completely dark and appears to be turned off.

Netd

Using the top menu bar, navigate to Apps > WebUI.

Files

Files > Log

Selecting “Files” will open the file browser where you can download and view the log files from the app.

Options

Options > General

logLevel

  • Select the log level for the app.

WebUI

Using the top menu bar, navigate to Apps > WebUI.

Files

Files > Log

Selecting “Files” will open the file browser where you can download and view the log files from the app.

Options

Options > General

logLevel

  • Select the log level for the app.

transport

  • Read-only: This field shows the internally used transport address.

web

  • This is the address of the web UI to run on. The default is on all interfaces and port 80, therefore “:80”. Be careful when changing this setting.