Specification
| Digital Audio Input | |
| Type | 32 channels, full range |
| Format | Dante™, Aes67 |
| Audio Performance | |
| Output Power @4Ω | 280W/CH |
| Output Power @8Ω | 140W/CH |
| Bridge Mode | No |
| Distortion | 0.005% 20hZ < f < 20kHz. Pout = 1W |
| Output Noise | 40 µV |
| Power Bandwidth | 20Hz - 35kHz |
| Freuquency Response | 10Hz - 48kHz +0/-3dB. All loads |
| Network Port P1 | |
| Physical Level | Standard Ethernet |
| Connector | Single RJ-45 |
| Cable Quality | CAT-5/6/7 |
| Transmission Speed | 10/100/1000 Mbps Full Duplex |
| Configuration | Switched, Redundant, Independent (see below) |
| Network Port P2 | |
| Physical Level | Standard Ethernet |
| Connector | Single RJ-45 |
| Cable Quality | CAT-5/6/7 |
| Transmission Speed | 10/100/1000 Mbps Full Duplex |
| Configuration | Switched, Redundant, Independent (see below) |
| General | |
| Mains Voltage | 230V/115V, 50–60 Hz |
| Compliance | CE, ROHS |
| Power Consumption | @100–240VAC,47/63Hz 10A |
| Heat Dissipation | Idle 333 BTU/h, 1/8 power @4Ohm 1066 BTU/h |
| Operating temp | 5°C – 30°C |
| Dimensions | L: 482mm, W: 392mm, H:88mm (2RU) |
| Weight | 15kg |
Network Port Configurations
