Operation Mode
Set operation mode
Caution
BTI module will reboot and all device profiles will be deleted
- Set’s the NGTC-BTI to sink(stream from device to BTI or source) or source(stream from BTI to headphone)
| Communication | Command | Parameter | Example |
|---|---|---|---|
| Request | AT+A2DPROLE=Parameter<CR><LF> |
||
| 0: Sink | |||
| 1: Source | |||
AT+A2DPROLE=0<CR><LF> |
|||
| Reply | <CR><LF>OK<CR><LF> |
Request operation mode
| Communication | Command | Parameter | Example |
|---|---|---|---|
| Request | AT+A2DPROLE<CR><LF> |
||
AT+A2DPROLE<CR><LF> |
|||
| Reply #1 | <CR><LF>+A2DPROLE=1<CR><LF> |
||
| Reply #2 | <CR><LF>OK<CR><LF> |